Audiocodes Syslog:34758635) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0 [Time:17-09@10:37:35]10:40:22.005 192.168.91.11 local0.warn [S=36517144] [SID=b9f1b9:10:703405] ( lgr_flow)( 34758636) !! [ERROR] (#22)RTPStreamResource::AllocateResource Allocate Resource – cannot allocate DSP. probably lack of resources [Time:17-09@10:37:35] 10:40:22.006 192.168.91.11 local0.notice [S=36517145] [SID=b9f1b9:10:703405] ( media_service)( 34758637) (#8) StreamsConnector Deallocated. [Time:17-09@10:37:35] Reason… Continue reading Cannot allocate more Media channel. current active: 0 and max is: 0
- Trifecta Telephony
- March 28, 2022
Cannot allocate more Media channel. current active: 0 and max is: 0
- Trifecta Telephony
- March 28, 2022
No Ringback on SIP calls
You may have ringback for some calls, but not others. The difference in the SIP signaling is that you may find that the carrier might be sending a 183 PROGRESS, rather than a 180 ringing. For the SBC to allow the ringback to come from the carrier, then we need to make sure the Audiocodes… Continue reading No Ringback on SIP calls
- Trifecta Telephony
- March 28, 2022
Grab RTP Audio from Audiocodes Call Trace
Run wireshark on the PC to get this audio. On the Web GUI,Go to System – Logging – Logging SettingDebug Recording Dest IP : Target IP of DR (usually PC where you installed wireshark)Debug Recording Dest Port : leave it as default 925(you have defined 515)Debug Recording Status : start Go to System – Logging… Continue reading Grab RTP Audio from Audiocodes Call Trace